The CATO 220-S pull to open fire alarm cover is
manufactured using a high-impact, non-rusting polyethylene base and cover with
with UV inhibitors. This alarm cover has a two-piece construction that
protrudes less than 4 inches from the wall and meets ADA projection requirements
and has a 5" square viewable window. Comes fully assembled, quick to install,
the cover can be opened quickly in case of emergency and can remain open during
inspection and maintenance.
Use this CATO protective cover for sensitive exposed
device such as:
- Kitchen Suppression Pull Station
- Fire Pull Station
- Emergency Shut-offs
- Electrical Switches
- Emergency Buttons
- Exposed Electrics
| The gasket (optional above) is manufactured with an
air pocket, which allows water-tight installation on stucco and other
rough, uneven surfaces. |
 |
- No Glass
- Dent and Rust Proof
- Indoor / Outdoor Applications
- Ultraviolet Inhibitors
- Reduces False Alarms
- "Pull To Open" Label CL-418 (included)
- Side "Fire" Label CL-420 (included)
Dimensions:Inner 7¼" x 6¼" x 3¼"
Outer 8¼" x 7½" x
3¾"
|
CATO Fire Alarm Covers |
| Model |
Inner |
Outer |
Features |
|
|
|
|
|
|
220-SB |
7½" x 6½" x
3¼" |
8¼" x 7½" x
3¾" |
Secure w/
Breaker Bar |
|
220-SBX |
7½" x 6½" x
3¼" |
8¼" x 7½" x
3¾" |
Secure w/
Breaker Bar and Gasket |
|
220-RB |
7¼" x 6¼" x
1¾" |
8¼" x 7½" x
2¼" |
Low Profile
Secure w/ Breaker Bar |
| |
|
|
|
|
220-S |
7½" x 6½" x
3¼" |
8¼" x 7½" x
3¾" |
Pull to Open |
|
220-SX |
7½" x 6½" x
3¼" |
8¼" x 7½" x
3¾" |
Pull to Open
w/ Gasket |
|
220-R |
7¼" x 6¼" x
1¾" |
8¼" x 7½" x
2¼" |
Low Profile
Pull to Open |
|
220-RX |
7¼" x 6¼" x
1¾" |
8¼" x 7½" x
2¼" |
Low Profile
Pull to Open w/ Gasket |
CATO is a brand of JL Industries a division of Activar
Construction Products Group, Inc. Models:
22011
22011B
|
Parts for CATO Fire Alarm Covers |
| Part Number |
Description |
|
220-G
(22020) |
Break Cover
for 220-RB, 220-SB, 220-SBX |
|
220-B (22050) |
Breaker Bar |
|
200 (22030) |
Pull Cover for
220-R, 220-S, 220-SX, 220-RX |
| CL-418 |
"Pull To Open"
Label |
| CL-419 |
"Break Panel"
Label |
| CL-420 |
"Fire" Side Label |
| 220-X (22100) |
Gasket for
220-SBX, 220-SX and 220-RX |