Channel-Frame Mirror shall be framed with one-piece, roll-formed stainless steel with ¾" face and neatly mitered corners. Double -strength continuous integral stiffener on all sides. Back of unit shall be galvanized steel. Separate brackets for concealed mounting. Mirror shall be of first quality ¼" polished float glass, guaranteed for 15 years against silver spoilage and protected by shock-absorbing, neoprene tubing with Poly-Glaze protective finish.
Mounting bracket is included.
ADA Compliant
Consult local and national accessibility codes for proper installation guidelines. Conformity and compliance to local and national codes is the responsibility of the installer.
Call for Custom Sizes
Standard Sizes - Model 781
|
|
W x H |
BradEX® |
W x H |
BradEX® |
W x H |
BradEX® |
|
16 x 20 |
|
20 x 36 |
|
** 30 x 36 |
|
|
16 x 24 |
|
** 20 x 60 |
|
** 36 x 36 |
BX |
|
16 x 30 |
|
24 x 30 |
BX |
** 36 x 48 |
|
|
18 x 24 |
BX |
** 24 x 36 |
BX |
** 36 x 72 |
|
|
18 x 30 |
BX |
** 24 x 42 |
|
** 48 x 30 |
|
|
18 x 32 |
|
** 24 x 48 |
|
** 48 x 36 |
|
|
18 x 36 |
BX |
** 24 x 60 |
BX |
** 60 x 24 |
|
|
** 18 x 60 |
|
** 24 x 72 |
|
** 60 x 36 |
|
|
|
|
|
|
** 72 x 36 |
|
|
** Mirrors 24 x 36 or larger are subject to LTL
shipping charges. |
Model 781 series channel-framed mirrors can be fabricated to fit a maximum
size of 120"W x 72"H.
FRAME:
One-piece, roll-formed stainless steel with bright annealed finish. Channel is ¾" x ¾" x 7⁄16" with 90° mitered corners. Double strength continuous integral stiffener on all sides for added strength.
BACK:
Galvanized steel.
MIRROR:
First quality ¼" float glass triple-silver-plated with electro-copper-plated layer and thermosetting infrared cured paint backing with Poly-Glaze protective finish. Manufactured in accordance with ASTM C 1036. All edges protected by shock-absorbing, neoprene tubing.
MOUNTING BRACKETS:
18 gauge cold rolled steel.
Option Features
- ¼" tempered glass mirror in lieu of polished fl oat glass mirror*
- Laminate glass
- Highly polished No. 8 architectural finish, 20 gauge stainless steel in lieu of polished float glass mirror
- Bright annealed 20 gauge stainless steel in lieu of polished float glass mirror
- Plexiglas®
An inherent characteristic of a manufacturing process for tempered glass is distortion which may vary from mirror to mirror.
Warranty
Bradley Corporation warrants to commercial and institutional purchasers only each new Bradley washroom accessory unit purchased from us to be free from defects in materials and workmanship under normal use and service upon the following terms and conditions:
This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any Bradley washroom accessory unit or part thereof which our inspection shall show to have been defective within the limitations of this warranty.
The period during which Bradley accessory units are warranted is as follows, measured from the date of our invoices:
- Complete unit, excepting mirrors - one (1) year.
- Stainless Steel Mirror Frames - fifteen (15) years against corrosion.
- Plate Glass Mirrors - fifteen (15) years against silver spoilage.
- Tempered Glass Mirrors - five (5) years against silver spoilage.
- Laminate Glass - five (5) years against silver spoilage
- Polished #8 Architectural Grade Finish on 304 Series Stainless Steel - one (1) year against corrosion.
- Bright Annealed Finish on 430 Series Stainless Steel - one (1) year against corrosion.