GRIPP Grab Bars are produced using premium 304 stainless steel construction
and available in three sizes from 12"- 24" lengths. The grab bars are
packaged with the patented no drilling required mounting hardware by nie wieder
bohren (no drilling required) Germany. The system is a professional
mounting system which can be installed in less than 5 minutes by the average DIY
consumer, no measuring and no drilling. These grab bars have been tested
and approved using the ADA (Americans with Disabilities Act) standards.
Simple, safe and secure, manufactured by nie wieder bohren (no drilling
required) of Germany. Projects from the wall 3 1/8" and concealed flag
diameter is 3". Premium Commercial Grade Grab Bar,1-1/4" Diameter, 304
Grade Candy Apple Red Painted Stainless Steel, 18 Gage Material ADA Compliant Grab Bars, German
engineered, 250lb capacity. The minimum surface width for mounting is
2-7/8". Lifetime limited warranty.
| Model No. |
Center to Center |
Overall Length |
| GB32012-CAR |
12" |
15" |
| GB32018-CAR |
18" |
21" |
| GB32024-CAR |
24" |
27" |
We offer three mounting kits (optional
above) for installing the same style and color grab bars on different
surface. This will allow all of the grab bars in an area to match.
| Optional Above |
Kit Number Included |
Wall Type |
| No Drilling Required |
GB00002-NDR |
Smooth Solid Surface |
| Snap Toggler |
GB00003-ST2 |
Drywall / Hollow Wall Anchor |
| Standard |
GB00004-DW |
Drywall Stud Mount |
No Drilling Required
For the no drilling required system to work, it must be mounted to a smooth non
porous, solid surface like, metal, concrete, tile, marble, granite, or mirror.
This system will not work on flexible surfaces like acrylic, fiberglass or
plastic. Cultured products are not recommend. Refer to the
installation instructions for specific details.
Snap Toggler
Use this option for hollow drywall wall
where the studs are in accessible. Four zip anchors and screws are
included. Use two per flange (per the manufacturer).
Standard
This drywall stud mount option includes 2-disc plates
and 6 #10 x 2" stainless steel wood screws. Installation instructions; locate
studs and use the wood screws to attach.